Performance Characteristic
We adopt the international advanced technology for this machine , the AL Bar transported by feed cam , the length of the AL Bar can be adjust freely . It also can be added double AL Bars if necessary . And the machine is low power consumption and much lighter .
| Name: | Disposable Non Woven Mask Machine |
| Power Supply: | 380V/220V |
| Application: | Producing Non Woven Face Mask |
| Feature: | Durable |
| Control: | PLC Control |
| OEM ODM: | Available |
Technical Parameter
Supply Power: AC380V or 220V 50HZ
Power : 6KW
Designed Speed : 200pcs/minute
Optimum Speed : 100 -160pcs/minute
Dimensions : 6000*800*1500mm
Net Weight:1200kg
Operating Program
Place the non-woven farbics ,AL Bar(2.8-3mm/w) ,meltblown on the feeding framework ,
Adjust the hand wheel to make the centers in a same line.
Open the main machine and ultrasonic welding equipment
Check the position of the edge folding pressure plate
Adjust the position of the AL Bar .
Check the position of the reshape roller , to be sure the 3 folding in the center of the mask .
Adjust the welding pressure to be sure welding fastness .
Adjust the position of the blade to be sure the mask cutting accuratly. Adjust the blade to be higher 0.5-0.7mm than the roller surface .
Maintenance
Scheduled check the main parts ,such as the axletree bearings ,ensure all the bearing lubricating enough.
Scheduled check the welding head mechanical wearing conditions , adjust the pressure to a suitable state , try to adjust the pressure to be minimum at the station of welding well .
Often check the tensile force of the raw material coils ,ensure all the materials running in step & the surface with no laxation.
Please adjust the pressure of the cutting blade to avoid blading damage.
